Luna Woodworks stamps are the highest quality rubber stamp for your business! These are perfect for stamping on bags and boxes. My stamps are made on American hardwood and handcrafted to perfection with love!

Send me your completed logo before you order so I can tell you the proper size to choose. Not all logos work for a stamp so if it has multiple colors please send it to me first. If you place your order without getting your logo approved and your stamp has very thin details/thin parts to the font and doesn't end up stamping well, it is your responsibility. I will make it with the understanding you are confident it will stamp well and you have read all of the following:

IF you are confident your logo or design will make a good stamp and you know the proper size to order, go ahead and order.

IF you are unsure about your logo or it has very thin lines/small fonts and/or multiple shades of colors that overlap, these usually DO NOT work so PLEASE send me your logo first so I can let you know!

Many people ask me what size I like and I prefer a 3" - 4" size honestly, they fit most standard ink pads and they are easy to hold in your hand and they fit most packaging. Ink is not included! (read more about ink in the INK SECTION)

SELECT WOOD of your choice from the drop down menu.

Choose between:
~Walnut (dark brown)
~Cherry (light brown/tan)
~Maple (white)

SELECT SIZE of your choice from the drop down menu.

If you’re unsure about the size of your logo please send it to me and I can tell you which size would be best for you. The size you select will be the actual size of the rubber stamp. The wood block will be slightly larger. Actual dimensions vary with each logo. IMPORTANT: It is in your benefit to send me your logo first and I can let you know the proper size to order. If your logo is square then you should order a 2x2, 3x3, 4x4, 5x5...etc.

NAME YOUR LOGO in the personalization box. VERY IMPORTANT! pretty please..name it.

When ordering, please enter the name of your logo or describe it as best as possible in the PERSONALIZATION box. (This is so I have all information with your order.)

INK INFORMATION and Using your Stamp

These do NOT come with ink! You can find large ink pads from many online retailers that work well with my stamps (search for EXTRA LARGE INK PADS FOR RUBBER STAMPS). They come in a variety of colors and sizes. Please be aware that the extra large ink pads really jump up in price and can be harder to find. If you are stamping fabric please search for Fabric ink or Block printing ink. For the extra large stamps some people prefer to buy the ink in bulk and get a 4” rubber roller to apply it. Search for (ink refill for rubber stamps) and (4” rubber roller for ink). I don't have a specific brand I would recommend as all that I have used pretty much work the same. I would recommend searching and shopping locally if possible. For most shipping boxes and bags using PERMANENT INK is recommended. Please keep in mind if you are stamping corrugated cardboard that is semi rough then you will see the lines of the cardboard through the stamp. You will need to have the surface behind the cardboard very hard and very flat to get a consistent stamp. Simply put a small amount of ink on a flat surface (paper or plastic sheet) roll the rubber roller over the ink and be sure to get solid coverage. Then roll onto the rubber stamp ensuring solid coverage. Equally press all sides and middle to stamp. It will take some practice for my larger stamps.

Please be aware that larger stamps with a lot of empty space in the middle tend to smudge when over-pressed on an ink pad. In comparison; stamps with a lot of surface area tend to show more imperfections of the material you are stamping. Stamping certain style of logos take some practice to make a perfect stamp. You'll find that stamps closer to the 3"-4" range perform the easiest and best. The engraving on top of the block will never perfectly line up with the actual rubber stamp so please don't expect perfect alignment of the rubber on the wood block.

After a few uses it's wise to clean your stamp with a wet paper towel. I honestly clean my stamp once a month. Every now and then there will be a smudge that shows through the ink. I will wipe it clean with a wet paper towel and then take some rubbing alcohol to clean any residue. This will make your stamp like new again. Be sure to lightly press the stamp into the ink pad multiple times, if you over-press you may smudge ink onto the negative space.

For my own personal reasons I do not make any political stamps (on either side of the aisle.) Super sorry for any inconvenience!

I often post and share stories on Instagram of every stamp so don't forget to tag me!

I directly support American Forests non-profit by planting hardwood trees right here in America! I'm giving around 10% of my profit currently but hope to increase it over the years as business grows. Right now I am working towards being carbon-neutral as a business but hope to be carbon-negative in the future. Right now all of my packaging is biodegradable and I use zero plastics. Trees are our most sustainable resource on the planet as long as we treat our forests right and we re-plant trees. That is what I hope to continue to do with your support. Thank you to all of my customers!

I'm amazed you made it this far...Thank you from the bottom of my heart. Please use coupon code STAMPMASTER for reading all of this. Be sure to enter the code in the correct box, you may need to scroll down a bit during checkout to find the correct shop code box. Thank you so much!